Insured · COIs for Contractors

Miami
Post-Construction
Window Cleaning

Post-construction window cleaning in Miami for new builds, additions, and remodels. We remove stucco overspray, paint specks, mortar haze, and adhesive from new glass and leave every window ready for the final walkthrough. Fully insured, $2 million coverage, $200 minimum.

Get a Project Quote Call Us

$2MLiability Coverage

$200Service Minimum

8+Years Experience

5.0 ★53 Google Reviews

The Final Touch on the Job

What Post-Construction Window Cleaning in Miami Actually Means

Post-construction window cleaning in Miami is the difference between a job that looks almost done and one that looks delivered. A new build, an addition, or a remodel leaves the glass coated in drywall dust, stucco splatter, paint specks, mortar haze, and the adhesive from factory labels. That residue does not wipe off, and if it bakes in the Miami sun it hardens onto the pane.

We treat every window with care: we test the glass, keep it wet, and lift the debris without scratching. It pairs well with exterior window cleaning and residential window cleaning for a complete handover. See our window cleaning pricing.

Ready for Handover

From Dusty Site to Spotless Glass

Shiny Windows technician cleaning newly finished exterior glass on a Miami Lakes building after construction

The Last Trade On Site

Window cleaning is the last thing that should happen after the dusty trades are done. We come in once paint, drywall, and stucco are finished, so the glass is clean right in time for the final inspection, the closing, or move-in day.

We work with general contractors, builders, remodelers, and property managers across Miami-Dade and Broward, and we turn around quickly when the schedule is tight.

Get a Project Quote

No Fine Print

What's Included on Every Post-Construction Cleaning

A complete handover of the glass, not just a quick pass.

Included on Every Job

Stucco and plaster overspray removal from glass
Paint specks, primer, and mortar haze removal
Sticker, label, and adhesive residue removal
Silicone and caulk smears carefully lifted
Construction dust cleaned from frames, tracks, and sills
Glass tested before any blade or solvent is used
Streak-free final rinse and dry
$2 million insurance and a COI on request
Itemized written quote before any work begins

What We Don't Do

Pressure washing (we do not offer that service)
Razor blades on tempered or coated glass
Cleaning before the dusty trades are finished
Heavy construction debris haul-away
Repair or replacement of damaged glass
Surprise charges after we start

The Process

How a Post-Construction Cleaning Goes

Methodical and careful, because new glass does not forgive mistakes.

1 Walkthrough & Quote

We review the window count and how heavy the construction residue is, then send an itemized quote before we touch the glass.

2 Glass Testing

We test each glass type first. Razor blades are used only on standard annealed glass, never on tempered or coated panes.

3 Debris Removal

We keep the glass wet and lift stucco, paint, mortar, and adhesive with the right technique. Where a blade is not safe, we use controlled solvents and pads.

4 Frames, Tracks & Sills

We clean construction dust from frames, tracks, and sills, where the fine grit that nobody else notices collects.

5 Final Rinse & Detail

A streak-free final rinse and dry with squeegee and microfiber, or pure water from the water-fed pole on upper floors.

6 Final Inspection

We check every pane under different light angles before we leave, so it is ready for inspection, closing, or handover.

Is Your Project Almost Done?

Tell us about the project and we'll send a quote for the final window cleaning. COI available for contractors and property managers.

Request a Quote

FAQ

Post-Construction Cleaning Questions

Direct answers. No script, no sales language.

How much does post-construction window cleaning cost in Miami?

Post-construction window cleaning in Miami starts at our $200 one-time minimum. Because new glass usually carries stucco overspray, paint specks, and adhesive residue, it takes longer than a standard cleaning, so we price each job after a quick look at the window count and how heavy the construction debris is. We send an itemized quote before any work begins. See the full breakdown.

What does post-construction window cleaning remove?

We remove stucco and plaster overspray, paint and primer specks, mortar and grout haze, silicone and caulk smears, sticker and label adhesive, drywall dust, and the fine construction film that settles on new glass. We also clean the frames, tracks, and sills where debris collects.

Do you work with general contractors and builders?

Yes. We work directly with general contractors, builders, remodelers, and property managers on new builds, additions, and renovations. We carry $2 million in general liability coverage and can email a Certificate of Insurance to your office before we mobilize.

Will scraping the glass scratch my new windows?

No, when it is done correctly. We test each pane first, keep the glass wet, and use fresh razor blades on standard annealed glass only, never on tempered or coated glass that can scratch. Where blades are not safe we switch to controlled solvents and pads. Careful technique is the whole job on post-construction work.

When should the windows be cleaned after construction?

Schedule the window cleaning after the dusty trades are finished, so painting, drywall, and stucco are done and the glass will not get dirty again right away. We are happy to coordinate with your project timeline and turn around quickly for a final walkthrough or closing.

Are you insured for post-construction sites?

Yes. Shiny Windows carries $2 million in general liability coverage and is fully licensed in Florida. We can provide a Certificate of Insurance naming your company or property as additional insured on request before the job.

See All FAQ

MiamiPost-ConstructionWindow Cleaning